Hi guys! I’m Sara, and I am the DIY home décor blogger behind Sincerely, Sara D. I am excited to be here on Remodelaholic, and I love sharing my projects in hopes of inspiring and showing how anyone can create a beautiful space with little cost! Some of my more recent posts are DIY Large Wooden Sign and DIY Shiplap Tutorial.
A few months ago, I shared the tutorial for creating the fabric wall in my laundry room. Today I’m sharing how to hang pegboard which is great for organizing all those laundry supplies. It would also be a great solution for a crafter and all the supplies that come with crafting!
Small laundry room? Sara has a nice large laundry room, but pegboard can be used in a smaller laundry room for great added storage too, like The DIY Mommy used in her cute laundry room here.
How to Hang Pegboard for Laundry Room Storage
by Sincerely, Sara D
Here’s what you’ll need:
- Peg Board (4′ x 8′)
- (6) Furring Strips (1″x 2″ x 8″)
- Chop Saw (to cut the wood strips to size)
- Hammer or Nail Gun
- Electric Screwdriver
- Primer & Paint
- Paint Roller
To begin, decide where you want your peg board to go and what size you want it to be.
Peg board typically comes in a 4 feet x 8 feet sheet, and I decided to not make any cuts and keep it the full size. I found the center of my wall and measured out where my peg board would go.
You will want to create a frame for the peg board so it sits off the wall. In order to easily do this, I took my level and drew the perimeter of the 4’x8′ rectangle.
Once I knew where my pegboard was going, I found the studs and tried to strategically place my furring strips over the studs. This proved to be a little tricky since some of the furring strips were not straight.
I used a nail gun to hang my strips.
After the frame was up, we added several more furring strips for support since I was going to be hanging some heavier items like my iron and ironing board.
We went through and drilled holes for the screws.
The majority of the screws were in studs.
We marked off the studs above the peg board.
We then attached the pegboard with screws making sure the majority were in studs.
I primed and painted the pegboard using Zinsser Primer 123 and finished it with Valspar’s Signature Paint + Primer in Coconut Milk.
Once the paint was dry, I hung my laundry supplies!
If you want to see all the details on where I found the supplies for my pegboard, you can check out this post.
I have plenty of room to add more items if needed.
Thanks so much for allowing me to be with you all today!
Get inspired with low-cost TOTAL laundry room transformation:
Sara Davis is the DIY home décor blogger behind Sincerely, Sara D. Sara believes she was created to create and loves sharing her work in hopes of inspiring others. In her DIY project tutorials, Sara shows that anyone can create a beautiful space with little cost and effort while giving others the confidence to create!
Sara and her husband Steve live in Pendleton, Indiana with their three children, Bryant, Benson and Lena. When not blogging or driving children to and from sports and school events, she teaches classes, consults with home décor clients and encourages others to create.