Carved Love Sign

A while ago, I tried to do the 31 days of posts thing and failed miserably (granted, I was doing it in addition to my regular everyday posting schedule…), but at least I introduced you to us and that was worth a shot.  One of the things I talked about is that my dad is a chain saw wood sculptor.  Growing up he always smelled of fresh cut wood — a smell that I love to this day!

Around my parents’ house there are a lot of very cool carved signs. My dad used rotary tools to create these signs and add details to his carvings.   I’ve been wanting to make a carved sign for years!   And so, when I was asked by Dremel to try out a new version of their rotary tool, I said: yes, I have just the project in mind!   Happily, this project was done using  just one single tool… a Dremel 3000, Rotary Tool you can pick it up at your local Home Depot.

We bought got our first Dremel back in college and have been using one for 12 years!  It is a great tool.  We use ours all the time while remodeling. Check out this post about 10 ways to use a Dremel.    This project took about 2 total hours, plus drying time! Is REALLY easy and super cute (IMHO)!

Carvel love sign using a Dremel-024

 

Carved LOVE sign!

Supplies:

Dremel 3000, Rotary Tool

1 piece of wood the proper size (I used a leftover piece of a pine 1 x 12 we got in the Lumber dept of Home Depot)

Paint or Stain, Paint Brush & Rag

Art Hanging Hardware

 

1. Cut The Wood

Start by cutting your wood to length, mine is 32″ long.  You can do this at your local Home Depot when you buy the wood or at home.

Carvel love sign using a Dremel-1

2. Color Wash, Stain or Paint Your Wood

I chose to color wash my wood, so the grain of the wood shows through the paint.   This is a technique I learned years ago when crafting with my sister and I love it! You can even use it to darken an existing (unfinished) stain like I did here on our Dutch barn door.

Color Washing Wood with Paint:

 A.  Take any regular paint color that you like.  I wanted the word to pop so, I picked a color that had a high contrast to the natural wood color.  I used left over paint that I had on hand, the color is Deep Sea Dive SW 6718.  

Carvel love sign using a Dremel-2

B. In a small bowl add about a half cup to 1 cup of paint(once you add the water, you can’t save it, so don’t over do it).  Thin with water, I poured in a little at a time so that it is still thick but runnier.  Mix with your paint brush. Do not thin it too much.  The thinner the paint the lighter the color, and vice versa.

Carvel love sign using a Dremel-3

C. Quickly paint your wood.  I chose to not paint the sides of my board, just the front of the board, so be careful of drips, since the paint is thinner, if that is what you want to do.Carvel love sign using a Dremel-4

D.  Do not allow the paint to dry.  While it is still wet, use an old rag to wipe off the excess paint.  For light colors, wipe off the paint with more pressure until it is the desired color.  For a darker color, don’t thin the paint as much and wipe the excess off with less pressure. Repeat until you have the desired color and wood grain showing.

Carvel love sign using a Dremel-5

E. Let board dry completely.  (Sand edges of board for a slightly faded look)

Carvel love sign using a Dremel-16

3. Transfer Text to your Board.

We designed the text to fit our board(shown below)  and printed it like a poster, in several pieces.

dremel sign copy

Tape the pieces together.

Carvel love sign using a Dremel-9

Center the design on the board.  Using carbon paper and a pen or pencil, transfer the text to the board.

Carvel love sign using a Dremel-11

Carvel love sign using a Dremel-13

4. Carve!!

With your Dremel rotary tool, and the high speed cutter attachment, follow the lines of your text carefully.   It is good to test on a piece of scrap wood first!  We did on just a tiny old scrap…

Carvel love sign using a Dremel-14

Try to keep the tool cutting at the same depth.    For the overall look, we decided to do an outline of each letter, but you could totally carve out the inside of each letter, too.  It is up to you!

Carvel love sign using a Dremel-15

5. Attach Hanging Hardware.

Use a picture hanging system that can hold some weight.  Our sign is REALLY heavy.  We used two screws in a stud on the wall to hang it.  We wanted it to be absolutely secure!!

Carvel love sign using a Dremel-17

And we put it up on the wall…  I “LOVE” it!

Carvel love sign using a Dremel-008

So the cool news about Dremel is that the have a new  add-on accessory, Dremel EZ Lock.  The EZ Lock system is really, well, easy.  A simple push and twist is all it takes for a nice tight hold on certain bits.  I was really impressed with how simple it was to switch and lock on a new cutting wheel.  You no longer have to use a tiny tool to switch the wheels with the right attachments.  I love it when I see tools evolve and just keep getting better and better, and since we’ve had a Dremel for years it is great to see their fun innovations!  You can pick up a Dremel for $59 bucks at the Home Depot!   The EZ Lock Cutting Kit will be $14.97 which is a great deal!

**Thanks to The Home Depot and Dremel for sponsoring this post.

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Please see our full disclosure here.

Similar Posts

32 Comments

  1. I love this kind of stuff! It is so cool. I love how you washed the paint on and how you used the dremel tool. I am definitely going to be on the lookout for this tool at garage sales this summer.

  2. i too learned to make my own stain by mixing water, and I have saved it in a sealed container for future use! I love the engraving idea!

  3. Great idea! I love it. Please correct me if I’m wrong, but I understood you to say that you could not store the washes. I keep several colored washes mixed up for use and store them in the inexpensive plastic containers with the screw on tops from Dollar Tree. They keep well.

  4. I wonder how using this paint technique would work on steps with a couple coats of varnish on them? I’ve been wanting to do something “creative” on my steps instead of just staining them. I’m crazy over grays and teal so this would look amazing!

    1. The varnish would make it more of a lighter wash than a deeper stain like this, I imagine… but I’m sure you could figure something amazing out! 🙂 Thanks for commenting!

  5. That was so helpful. I have been wondering how to do this for years. I want to do this to a bathroom vanity. Should I varnish it afterward and what would be the best way to do that?

    1. Yes, I would finish it with a good topcoat. Keep in mind that if the vanity already has a finish on it, the colorwashing might not stick as well as it does to bare wood.

  6. Hi Cassity!! I am SO making this LOVE sign. It will be a great addition to my gallery wall. I would love to know more about the three blue and white square pictures on the left. Did you make or buy? Thank you!!

  7. You can create that same look with spray paint. I used a light color, spraying an area and wiping it towards the unpainted end until I’d covered the whole board. Made an awesome, rustic looking book shelf.

  8. Just want to say your sign is cute. I may have to buy one of those tools, even though I have a million other projects going on. Lol. I even love that little sample “love” sign and i hope you kept it 🙂

      1. An electric router carpenters use gives the cut of the letters a constant depth…. and has a guide bar for straight lines. A bigger tool than a dremel of course.
        I`m hoping i can use gloss paint thinned with white spirit on bare wood? Or artists oil paints ? linseed oil maybe?

    1. Thanks, Kylie! That’s one of my favorite pieces of art — it’s called Rescue of the Lost Lamb by Minerva Teichert. I’ve had it for years, but you can check local Christian art stores (especially if you’re in the Utah area) or even online art stores might have it — I found a seller on Etsy as well (affiliate link) –> https://rstyle.me/n/bu4pcsb5hef

  9. Yes I love my Dremel. I’ve got the 4000 , and have only started to teach myself how to use it. No significant works have arisen from my attempts just yet, but I’m getting there!

  10. I love this I have a project like this I am about to try. I also would love to know where you got the rug in the picture it is beautiful and would match my decor prefectly.

  11. Hello… Thank you so much for the tutorial! I loved it! I just got myself the Dremel moto saw, Dremel 4000 engraver and now testing the Dremel versatip.
    Loving it and reading your step by step tute helps me very much.
    However I do have a question on the engraver… Which bit can I use to outline my drawing onto the board?
    Many many thanks, Agnita

    1. The colorwashing will work on any unsealed wood, but if the barn wood has a rough texture, you’ll have to be careful in how you apply and wipe off the stain mix. The carving would work wonderfully on barn wood!

Leave a Reply

Your email address will not be published.