Make A Homemade Curtain Rod For Under $10

25 Comments

-

Submitted by Love and Renovations

 

Isn’t there just something about curtains that makes a room feel complete?

They seem to bring it all together and really make a room feel so much more polished. Which is why for the past 5 months since we moved in (side note: five months already?!) I’ve been dying to get some curtains up in our living room.

I’m sure you can see where this is going – we FINALLY got curtains done for our living room and I am absolutely and completely, head-over-heels in love with them.

Before I show you, though, let’s get into some details. You may or may not have noticed, but the windows in our living room are absolutely giant.

We weren’t too concerned about getting enough fabric to completely close the curtains because we don’t plan on ever having these curtains closed. We love the light flowing into our house and we have some nice (faux) wooden blinds to give us some privacy, so we really just need the curtains to be pretty.  The real problem came in finding a curtain rod. Not only are they incredibly expensive, it’s next to impossible to find one that’s long enough to cover our windows without paying a ridiculous amount of money.

So naturally, we did what we always do in these situations: we decided to make our own. I did a little research and quickly learned that there are not many people out there who have attempted to DIY curtain rods – and most of the people who have tried it have done something that isn’t really our style. So basically, we were on our own here.

After a little bit of research and a lot of browsing at Lowe’s, we ended up choosing to go with electrical conduit – it’s super cheap, comes in a variety of thicknesses, and has a nice, industrial look to it so we wouldn’t even have to do anything to the finish.

We also got a ton of random hardware from the electrical aisle that looked like it could be used for a curtain rod – things like two-hole straps, couplings, and knock out seals. No idea what those are? Yeah, me neither, but we’ll get to that in a minute.

Before I get started, I’ll warn you that this post might get a bit technical and tedious. I totally don’t blame you if you want to just scroll down to the bottom and look at the pretty pictures. But I want to get into the DIY details of how to actually do this for anyone who might be interested – we’re still in a bit of shock over how much money we saved by going this route, and we’re totally in love with the results, so I feel obligated to share how we did it!

Okay, now let’s talk details.

We decided to purchase 3/4″ conduit because it was just the one we liked best. They had 1/2″ and 1″ as well, so you could really go with whatever size you prefer – just make sure all of the hardware matches your size and you’re good to go.

After measuring the windows (plus adding on some length on either end so we could hang the curtains wider than the window, making it look even larger), we decided that we wanted 12 feet of curtain rod for the window behind our couch, and 8 feet for the front window.

Of course, conduit only comes in 10 feet lengths, so that meant we were going to have to do some cutting. We wanted the rods to be identical and it just so happened that our lengths worked out perfectly for us to just buy two lengths of conduit have a seam in the middle of each – we cut each one right at six feet, so we ended up with two six foot pieces and two four foot pieces.

Lowe’s couldn’t cut the conduit for us, but thankfully Corey just got a reciprocating saw for Christmas that came with a metal-cutting blade! They sell plenty of tools that can cut the conduit for you, but most of them will run you about $20 – which technically speaking, isn’t much at all. But since Corey had the saw already, we were able to just purchase a $1.67 hose clamp from the plumbing aisle to help keep the blade straight. You know we’re all about saving money!

This is the hose clamp on the conduit – we just measured the conduit at six feet, marked it with a Sharpie, and put the clamp on before cutting:

And after cutting we had this:

So now we had four pieces of conduit that needed to be pieced together to make an actual curtain rod. This is where the coupling comes in. Here’s what it looks like:

It’s insanely simple to put together. Just put one length of conduit in one end and tighten the screw, then do the same on the other side. And then, you have a curtain rod (almost)!

At this point, the only thing missing to make this look like a real curtain rod is finished ends. Because conduit is used to run electrical wires, it’s hollow in the middle and has  holes at the ends – we wanted it to look a little more finished. We talked about actually getting finials for the ends, but we couldn’t find any that we liked (or that were cheap enough for our “keep the price as low as possible” budget). So, we found some caps for the end (they’re technically called knock out seals) and plopped them in.

The only weird thing to keep in mind about the knock out seals is that you have to get a size smaller than your conduit in order for them to fit. I’m not an electrician so I can’t explain why (and I’m sure these things aren’t really even intended for what we did with them), but all I know is we had to buy 1/2″ knock out seals to fit into our 3/4″ conduit.

We’re really glad we went with these rather than an actual finial – you can barely even see them once the curtain rod is hung – it just looks nice and finished. And extremely simple, which is exactly what we were going for.

At this point, we were finally ready to hang them. We wanted to hang ‘em high and wide to maximize the visual size of the windows. It sounds like a silly concept, but this little graphic is my favorite way to show how big of a difference it can make:

(Source)

We measured and marked a spot for the rod based on how long our curtains + curtain hooks were (we’ll get to that in a minute) and I climbed up on the stepladder to hold it in place and make sure we were happy with the location and the way it looked.

Once we were sure we liked how it would look, it was time to hang it! One thing to keep in mind if you tackle something like this is to make sure you put your curtain rings on the rod before hanging it – the rod sits very close to the wall and can’t be taken out nearly as easily as traditional rods, so you’ll want to have the rings already on it and ready to go as soon as you’re done hanging it!

To get our curtain rod on the wall, we used two-hole straps. I have no idea what they actually are, but they look like this:

(Sorry, I forgot to snap a photo before we actually got them on the wall)

An important thing to remember here is that you’ll need two straps in the same size as your conduit, and one that is a size larger (so, for example, we used two 3/4″ and one 1″ strap on each curtain rod). The reason for this is that you have the coupling in the middle of the rod, which adds some bulk to the middle section, meaning you’ll need a bigger sized strap.

From here on out, it’s just about measuring, screwing in the straps, and hanging the curtain rod!

We ended up using curtain rings with clips to hang the actual curtains – I wasn’t about to actually sew grommets into the curtains, and this was the easiest (and cheapest) alternative. We picked them up at Ikea, and while they aren’t nearly as nice as some of the alternatives that they have at Lowe’s, they were much more affordable!

Okay, so we’ve chatted about building and hanging the rod and how to hang the curtains. I’m assuming you’d like to see what the curtains actually look like now, right?

We chose the fabric for our curtainsseveral months ago, but seeing the full panels of fabric (rather than just a tiny swatch) in my house was beyond exciting – and a little terrifying. It’s an incredibly bold pattern and combination of colors, which is more than a little intimidating.

But I had spent several hours cutting, ironing, and sewing all that fabric into curtains, so I wasn’t about to back down at this point.

Thank goodness we fell in love once they were up on the wall.

We’re pretty blown away by how much they bring all of the colors in our living room together. The orange ottoman fits in beautifully with them, and they add some (MUCH needed) pattern and fun to the room.

I’m obsessed.

We’re also really happy with how the rods turned out – they have a little bit of an industrial feel, but mostly, they’re just incredibly simple and fade into the background, allowing the curtains to be the star of the show.

Yup, I think I like ‘em. Of course, now that they’re in there, I have a few things about the room I’d like to change. Specifically the turquoise side table next to the couch. It’s adorable and the perfect size for the space, but I feel like the turquoise is a bit much right next to the crazy-colorful curtains and the orange ottoman. But, as usual, we’ll just take it one step at a time and see what we think after we’ve lived with it in the room for a while.

And now that I’ve rambled on for over 1,500 words about our curtain rods (whoops!), let’s chat about what this actually cost us.

- (2) 10-foot, 3/4″ lengths of conduit: $3.29/each

- (2) 1″ two-hole strap: $0.70/each

- (1) 4-pack of 3/4″ two-hole straps: $0.80

- (1) 2-pack of 3/4″ hose clamps: $1.67

- (1) 5-pack of 3/4″ couplings: $3.36

- (4) 1/2″ knock out seals: $0.35/each

TOTAL for the curtain rods: $15.21

Add in four 10-packs of IKEA curtain rings at $2.99 each, that brings our total to $27.17 for the entire project (not including fabric for the curtains, obviously).

I’d say that’s pretty good, considering the cheapest curtain rod we could find in the size we needed was over $50 (for just one rod!), and it didn’t include curtain rings!

And I might be slightly biased, but I think our under-twenty-dollars curtain rod looks way better than any of the options we could find in stores.

So, what’s your take on curtain rods? Do you like them streamlined and simple like us, or do you prefer something a bit more ornate? More importantly, how do you feel about curtains? Do you go for bold and eye-catching, or do you keep ‘em neutral?

About 

Comments

  1. says

    Fabulous, Brilliant, Stupendous!! Love the coupler trick, love the conduit trick, love the finished curtains!! And I’m so glad you posted the diagram of how to hang the fabric outside the window – it drives me nutso when I see someone covering all the glass with fabric.

  2. says

    i love this project! curtain rods are really super expensive. we have a large sliding glass door in our bedroom that is 100″ long. we went shopping at Ikea this weekend and even for something that long that I liked, it was going to be around $45-$50. this is such an affordable option that brings a nice industrial feel to the room! I might have to try :)

  3. eddielicious says

    Great idea. But just like hanging rods too low is a pet peeve of many, so is not having enough drapery stack in propartion to the window size. I think another panel (108″ width total)on each side of the bif picture window would look soooo much more like custom draperies.

  4. says

    What a great idea!!!! I have some huge windows I have been dying to add curtains to and couldn’t afford to do so. I am so doing this! I love the curtains you made as well.

  5. says

    Great idea! Actually, we used white spindles! And, I love spindles. I have more old fashioned taste. I found a person on Kijiji selling 40 of them for $40. Now, we have had to do some tweaking, but we think we have finally figured out how to join two together, to make the length needed, without any sagging. And, I intend to get glass knobs to screw onto the ends. I will just unscrew them when I have to take the curtains down to wash.

  6. Vidette says

    I love the simple design of the curtain rods. It’s the perfect backdrop for the curtains. I love a bold curtain myself. Your room looks awesome.

  7. Judie S. says

    Beautiful curtains and rods!!! They look great!!! And what a great fabric choice, for sure!!! This is an excellent, well-written, easy-to-understand tutorial. Thank you!!

    Just an FYI, you can get a “Junior Tube Cutter” for around $6 that will cut the tubes (after a few spins around the conduit). The cut will be clean and your edges will be smooth. To give credit where credit is due, I found the info and a tute on how to use the tube cutter at House of Hepworths: http://www.houseofhepworths.com/2011/10/11/how-to-make-a-cheap-awesome-professional-curtain-rod/

    I have all the supplies and fabric, and now I just need the time to tackle my rods and curtains.

  8. says

    I love them! How innovative! I have a cat that constantly knocks down my rods, and after replacing them numerous times, maybe this is what i need to secure them more!

  9. jeanne says

    I love the idea of cheap curtain rods. A friend of mine had another idea which came out awesome and that she got a nice shower curtain rod from walmart that was cheap and spray painted it silver and attached to the wall for a curtain rod. She is pretty inventive.

  10. Laura says

    Awesome idea! Thank you so much! Just bought drapes for our new house. I was shocked at the prices they want for the hardware to hang them. I like your idea so much better. It looks wonderful and I love the material. I wish I used color more in my decor. It does NOT look “cheep” as one person said. What a nasty comment. If you can’t say something nice, don’t say anything at all.

  11. Christi says

    I just wanted to thank you for this post on a curtain rod made from conduit. I have a 16 foot wall that contains 3 windows and a door. I did not want to spend a lot of money on individual rods, hardware and 8 curtain panels. I googled for inspiration, knowing there had to be a creative woman who had shared some amazing ideas. I found your site. What a blessing! Thank you for the detailed steps. I took my phone to the hardware store- double checking your post- thankful you were keeping me from multiple trips for things that could be forgotten. I was able to find lined $40 panels at Tuesday Morning (and only had to buy 5, thanks to 16 feet of conduit), the conduit, conduit connector and paint—- for a total of $250 for all. Thank you!!!!!

    • says

      Christi, we are so glad that our site was a big help for you. Amanda did an excellent job with here certain rods on this post. Another cheap place for certain rods it IKEA. I am not sure how long they go, but the ones we have used have been awesome and at a great price. Thanks for finding out site helpful.

  12. None DIY says

    Thank you! I will know the next time when comes to put up Curtain pole. Your pictures DON’T and DO were a great help!

  13. Debbie Stong says

    Conduit piping is inexpensive if you don’t get a long pipe. My daughter recently had an ides for hanging curtains in her bedroom. We needed something long enough to go all the way across our den. We converted half of the den into a bedroom and the den is so big that we still had room to have a separate family room. We ended up using PVC pipe. PVC pipe also comes in various widths and diameters plus can be painted. Putting it together wasn’t hard at all. We measured the length on the space we wanted to put the PVC across and pretty much used the same methods for attaching to the ceiling. It looks great and the curtains going across match the furniture in the family room.

  14. Marnie says

    I love this fabric! Could you tell me the name of it? I tried finding it in this post and the one where you chose it, with no luck. The colors and pattern are awesome! Looks terrific!

  15. Ashley says

    Your curtains and rods are such an inspiration. I used the idea in our new home that was built in 1905, it adds a perfect touch of industrial design!! I am curious if you had any trouble getting the end caps to fit in the conduit, because I am having some trouble getting them to fit?? Any suggestions would be greatly appreciated!! Thanks : )

  16. Renee says

    Great article!! I have an unusual situation, window is wide, about 100″ across. No space (at all) on one side for curtains when open, and I refuse to give up my cherished light from the window, so the curtains have to open to one side, not middle to both sides. Help!! I’ve tried to solve this via ikea, but no good (low cost) solution.

Leave a Reply

Your email address will not be published. Required fields are marked *