Cassity Kmetzsch started Remodelaholic after graduating from Utah State University with a degree in Interior Design. Remodelaholic is the place to share her love for knocking out walls, and building everything back up again to not only add function but beauty to her home. Together with her husband Justin, they have remodeled 6 homes and are working on a seventh. She is a mother of four amazing girls. Making a house a home is her favorite hobby.
Creating A Taller Crown Molding Look
party highlight by Creations From My Heart
I’ve been SLOWLY working on the master bedroom transformation.
So…… in the mean time I’m would love to share with you another project that
I mainly my hubby completed.
Here’s what the project looked like when we began.
The bathroom had nice dental molding,
just not BEEFY enough for my liking.
Once my husband agreed to do the project for me, I quickly ran up to the wood working store to get the supplies. I figured while he was in the mood to do the work I better get the wood, just in case he had second thoughts about doing the project.
I purchase a panel molding that was about 1″ wide. He cut and mitered the corners and placed the piece of trim about 2.5″ below the dental molding. He used my handy dandy air compressor and staple gun to attach the molding to the drywall.
I then primed, painted and glazed the all the wood trim and the piece of drywall that was between the dental molding
and the panel molding.
I love adding a glaze to dental molding.
The stain sticks to all the indentations of the wood
and really adds a nice detail.
Now that’s the look I wanted.
some nice BEEFY molding that didn’t cost a fortune!
This was a very inexpensive project with a big transformation. The panel molding was much easier to do than the crown molding. At least that’s what it seemed like to me.
You’ll have to ask my husband about that!