Santa and Reindeer Garland 12 days of Christmas; Day 1

14 Comments

Need a quick and easy Christmas garland?  Look no further!  This cute paper Santa and reindeer garland is easy to make and inexpensive!  Perfect paper crafting without breaking the bank, and as a bonus, it is a pretty quick craft!

 Christmas garland-7

12DaysCOUNTER1

Supplies:

1. Template, (I purchased mine from Silhouette Santa Sleigh and Reindeer)

(My deer were cut at about 7 1/2 inches long , or two per 8.5″ x 11″ sheet of paper, Santa took up one whole 8.5″ x 11″ page)

2. Scissors or paper cutting machine of your choice

3. Cardstock Paper

(color of your choice, brown, white or silver reindeer, red or gold sleigh… whatever you like)

4. Hot glue and gun

5. Twine or Ribbon

 

Instructions:

Christmas garland

1. Start by tracing your template onto the card stock paper you have chosen for the reindeer and sleigh (or use a template in your cutting machine)  For my 7 foot garland I had to cut about 11 deer plus Santa’s sleigh.  Trace and cut out the shapes, if you are using scissors, I would suggest simplifying the antlers a bit.

*Remember you can choose any color you like that will match your Christmas Decor…. Don’t let my color choice feel like the only option.  Go crazy!

2. Plug in your glue gun and get it warmed up.

3. While your glue gun is warming the glue, cut your twine to length.  I left about 2 extra feet on either side, because I like how it looks hanging down on either side.  To check my length I tied a loop about 2 feet from one end, I hooked the loop to the nail it will be hanging from on my mantel.  Then I strung it across checking that I liked how it hung.  Once I felt good about it, I tied the second loop on the other side, added the 2 feet and cut it. 

* This can be hung anywhere, you don’t have to have a mantel, try a stair railing, across a window,  in a doorway endless options!

Christmas garland-2

4. I started with Santa.  Lay the cutout good side down, back side up.  Glue a stripe of hot glue across half of the top, place the twine in the hot glue.  Be careful where you place your fingers!  Let it cool for about 30 seconds to a minute.  Once it feels secure, finish gluing on the string.  Keep adding the deer along the twine.  Be sure to let the glue dry before moving along,  unless you have a really LONG table!!  I eyeballed the space between each deer, but you can measure it if you like.

Christmas garland-3 Christmas garland-4

5. Add a counterweight!  In order to keep my Santa and accompanying deer hanging nicely, I added a bead of glue along the bottom of each to weigh the bottom down, and keep it upright, when it was hanging.

Christmas garland-5

Once the glue is all cool and done,  hang it where ever you like!  Sit back and admire your handy work!

Christmas garland-7

 Merry Christmas to all and to all a good night!

 And like I announced yesterday the fun has just begun!  This post is the first day for our 12 days of Christmas posts that I am working on with 5 other great bloggers!

12 Days of Christmas #12days72ideas

 

Please click on the buttons to go see other FABULOUS Christmas ideas!!

chalkboard-advent-calendar-how-to-project_thumb

A-four-candles-Advent-twig-wreath DIY-Wooden-Blanket-Ladder
evergreen-frame-04902 scallop ornaments Pipe-Cleaner-Chirstmas-Wreath-ornament-tutorial-13-535x800

Be sure to check out DAY 2

 

 

About 

Cassity started Remodelaholic with her husband, Justin, to share their love for knocking out walls together. She is an interior designer, wife, and mother of two. She and Justin have remodeled three homes from top to bottom and are working on their fourth. Making a house a home is her favorite hobby.

    You can also find me on
  • facebook
  • googleplus
  • pinterest
  • twitter

Comments

  1. says

    What a cute idea. Love it, I can see using this in my triple window next year when all the renovations are finished. Wished I had a machine to cute mine.

Leave a Reply

Your email address will not be published. Required fields are marked *