DIY Kitchen Backsplash Stencil
My husband and I have been slowly finishing up our kitchen remodel, and for the past few months I have been debating whether or not to create my own kitchen backsplash as a statement piece. As I’m sure you’ve already figured out I’ve decided it was completely worth it! I love creating anything that is unique and interesting so this project was right up my alley. And guess what? I’m even going to give you the files to create your own for FREE! Awesome, right? Let’s get started!
DIY Kitchen Backsplash Stencil
- semi-gloss paint (in whatever color you would like to use)
- stencil blank(s)
- painter’s tape
- PDF stencil file (to print out on your printer)
- SVG stencil file (download for your Cricut machine)
- foam paint brush
- thin paint brush
- measuring tape
- printer or Cricut machine (aka. stencil maker)
1.) First things first, do one of the following (any of these methods are acceptable so just select your favorite):
a.) download my palm leaf PDF stencil file to print out on your printer
b.) download my palm leaf SVG stencil file for your Cricut machine
c.) create your own stencil!
Note: Just in case you’re wondering, I have been specifying using a Cricut machine since I know that the Silhouette machine requires special software in order to use your own designs that are not created within their program. However, you are most welcome to use my PDF stencil file (if don’t mind doing the work to turn it into a Silhouettte stencil first) and cleaning it up a bit on your own.
2.) Then, it’s time to create your actual stencil! So, grab your handy-dandy tape measurer and measure out the space you will want to put it to make sure it will fit properly.
Note: Please keep in mind that these downloads have been formatted for my own backsplash. You might need to resize your own to fit accordingly, or you can also cut off a little bit of any of the sides if it is too big.
3.) Once you are sure that your stencil is formatted to your liking go ahead and either print it out on your printer or Cricut machine.
For this step, if you have decided to print it out with your printer you will then need to cut it out, transfer it onto your stencil blank, and cut it out again.
If you are using your Cricut please cut with your stencil blank. TIP: I used the custom setting for my blade for 0.40mm thickness.
4.) Next, using painter’s tape go ahead and tape around the area around your backsplash to ensure no paint gets on your countertop, stove, electrical outlets, etc.
5.) Then, go ahead and tape up your stencil to the wall.
TIP: I found that taping it only on two side was enough, but you can definitely put it up any way that is easiest for you.
6.) Now it’s time to paint!
I’ve tried a variety of methods before with similar projects, but my favorite way to start off my design is with a simple foam brush. All you need to do is to get just enough paint onto your stencil so it doesn’t run underneath, but also gives you some guidelines to paint it in later.
7.) Then, take off your stencil (let it dry off for a few minutes), flip it over, and paint it all over again.
8.) Repeat this method until you have reached your end point.
9.) Last, with your thin paint brush paint in all of the insides and edges of your stencil.
10.) Enjoy your end result! 🙂
Cost and Time Involved:
Semi-gloss paint: $30
Stencil blanks: $4
Foam brush pack: $2
Thin paint brush pack: $2
Total Cost: $38
Total Time: I would set aside one weekend. When painting this much detail you’ll probably want to take a few breaks, or even stop halfway through and finish the rest on the following day.
I hope you enjoyed reading this tutorial and happy designing!
More inexpensive DIY backsplash ideas:
painted subway tile backsplash
painted peel-and-stick plank backsplash
reclaimed pallet wood backsplash
Thank you so much!